Noryl PPO WCD801A物性表 - GE WCD801A, Sabic WCD801A, WCD801A塑料, Noryl PPO WCD801A

华秀塑胶为您提供详细的Noryl PPO WCD801A物性表参数。

想了解更多的与Noryl PPO WCD801A相关的物性参数，请点击 NORYL™ PPO产品列表。

如果您对我们的Noryl PPO WCD801A有任何疑问，或者想索取Noryl PPO WCD801A 物性表datasheet、物质安全资料证书MSDS、ROHS检验报告、SGS报告、REACH环保证明、FDA证明、EU法规证明、UL证书及出厂证明COC/COA报告等，敬请拨打我们的服务热线 020-82582555，或者点击联系我们给我们留言。

GE Engineering plastics Physical properties directory >> NORYL™ PPO >> WCD801A Physical property table

[下载WCD801A物性表PDF] Consult WCD801A

Noryl PPO WCD801A Physical property

柔软,非卤化阻燃PPE-TPE挤出级,低比重,硬度80,导线绝缘材料和外壳应用.

Property

TYPICAL PROPERTIES ⁽¹⁾
MECHANICAL	Value	Unit	Standard
Tensile Stress, brk, Type I, 50 mm/min	120	kgf/cm2	ASTM D 638
Tensile Strain, brk, Type I, 5 mm/min	120	%	ASTM D 638
Flexural Modulus, 12.5 mm/min, 100 mm span	800	kgf/cm2	ASTM D 790
Hardness, Shore A, 30S reading	80	-	ASTM D 2240
Tensile Stress, break, 50 mm/min	13	MPa	ISO 527
Tensile Strain, break, 50 mm/min	119	%	ISO 527
Flexural Modulus, 12.5 mm/min	90	MPa	ISO 178
IMPACT	Value	Unit	Standard
Brittleness Temperature	<-40	°C	ASTM D 746
PHYSICAL	Value	Unit	Standard
Specific Gravity	1.1	-	ASTM D 792
Melt Flow Rate, 250°C/5.0 kgf	11	g/10 min	ASTM D 1238
ELECTRICAL	Value	Unit	Standard
Volume Resistivity	3.8E+15	Ohm-cm	IEC 60093
Dielectric strength in oil, 2.0mm	23	kV/mm	IEC 60243-1
Relative Permittivity, 50/60 Hz	2.8	-	IEC 60250
Relative Permittivity, 1 MHz	2.8	-	IEC 60250
Dissipation Factor, 50/60 Hz	0.03	-	IEC 60250
Dissipation Factor, 1 MHz	0.004	-	IEC 60250
Comparative Tracking Index	600	V	IEC 60112
FLAME CHARACTERISTICS	Value	Unit	Standard
UL Recognized, 94V-0 Flame Class Rating (3)	4	mm	UL 94
Smoke Density on 0.5mm plaque, Non-flame, Ds, max	95	-	ASTM E 662
Smoke Density on 0.5mm plaque, Flame, Ds, max	142	-	ASTM E 662
Glow Wire Flammability Index 650°C, passes at	3	mm	IEC 60695-2-12
Glow Wire Ignitability Temperature, 3.0 mm	750	°C	IEC 60695-2-13
Oxygen Index (LOI)	26	%	ISO 4589
WIRE AND CABLE - UL 1581 tested on 2.0mm wire with 0.12mmx20 stranded copper	Value	Unit	Standard
Tensile strength @ break	16	MPa	UL 1581
Tensile elongation @ break	205	%	UL 1581
Tensile strength @ break after 7days @113°C	17	MPa	UL 1581
Tensile elongation @ break after 7days @113°C	145	%	UL 1581
UL temperature rating	80	°C	UL 1581
Heat Deformation at 100°C/250g	16	%	UL 1581
VW-1	Pass	-	UL 1581

Source GMD, last updated:2006/01/12

Processing

Parameter
Wire Coating Extrusion	Value	Unit
Drying Temperature	75 - 85	°C
Drying Time	5 - 7	hrs
Drying Time (Cumulative)	12	hrs
Maximum Moisture Content	0.02	%
Extruder Length/Diameter Ratio (L/D)	22:1 to 26:1	-
Screw Speed	15 - 85	rpm
Feed Zone Temperature	180 - 220	°C
Middle Zone Temperatures	220 - 250	°C
Head Zone Temperature	220 - 250	°C
Neck Temperature	220 - 250	°C
Cross-head Temperature	220 - 250	°C
Die Temperature	220 - 250	°C
Melt Temperature	220 - 250	°C
Conductor Pre-heat Temperature	25 - 120	°C
Screen Pack	150 - 100	-
Cooling Water Air Gap	100 - 200	mm
Water Bath Temperature	15 - 60	°C

Source GMD, last updated:2006/01/12

NOTE: Recommended Drying Parameters are based on usage of Dehumidify Drying / Drying Oven.

THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.

[下载WCD801A物性表PDF] Consult WCD801A

Physical properties of related products: WCD993 WCP821U WCA105 WCA875 WCA901 WCP781 WCD861A WCD891B WCP700 WCP761 WCP821 WCP921 WCV063 WCV065 WCV072 WCD851 WCD855 WCD915 WCD771 WCD795 WCD825 WCP921A WCD883 WCD841U WCD835 WCD801AU WCA871A

Correlation search: WCD801A-111 WCD801A-701 WCD801A-BK1066 Noryl WCD801A WCD801A物性 Sabic WCD801A GE WCD801A PPO WCD801A PPO 工程塑料 PPO 树脂 GE PPO PPO 塑料

广州华秀塑胶有限公司不仅是专业的Noryl PPO WCD801A原料供应商，亦注重技术支持及全方位的解决方案，提供从材料鉴定、模具设计、成型加工等系列帮助，亦可为客户量身定制各特殊性能之Noryl PPO WCD801A材料，进而协助客户提高产品竟争力。

联络我们

地址:广州市天河区中山大道中439号东圃天银商贸大厦1720-1723室

电话:020-82582555

传真:020-82523699

Email: sales@va-so.cn

Noryl PPO WCD801A报价 >>

常规产品

长纤增强尼龙66 长纤增强PPA
长纤增强尼龙6 长纤增强PP
长纤增强复合材料冲击改性复合尼龙66
冲击改性复合尼龙6 高强尼龙
冲击改性复合尼龙冲击改性复合材料
改性PP 改性的合金料
高温改性塑料含氟聚合物
改性POM 改性PBT
改性PC 焊接用复合塑料
高比重复合塑料永久防静电塑料
永久防静电ABS 永久防静电合金
永久防静电POM 其他导电材料
导电尼龙导电PE,导电PP
高温导电塑料导电POM
导电PBT 导电PC
其他非PTFE自润滑塑料非PTFE自润滑PA
非PTFE自润滑聚苯醚非PTFE自润滑PPA
非PTFE自润滑聚甲醛非PTFE自润滑聚碳酸酯
其他润滑塑料润滑尼龙
润滑烯烃润滑PPO(PPE+PS)
耐热润滑塑料润滑POM
润滑PBT 润滑弹性体
润滑PC 挤出PBT
热传导复合塑料其他PC
EMI/RFI屏蔽复合塑料预着色非填充树脂